Why use high-efficiency fluoride removers

Release time:

2021-11-12 11:01

[Advantages of defluorination agent]

1. A full range of defluorination agents can treat various organic fluorine, inorganic fluorine, high-refractory fluoride-containing wastewater and high, medium and low fluoride-containing wastewater, and the fluorine content of sewage can be treated to below 1mg/L.

2. This kind of sedimentation speed is fast, the absorption efficiency is fast, and the removal rate is high. Under the same conditions, the defluorination efficiency of activated alumina is 2-4 times that of activated alumina and 8-10 times that of zeolite, which greatly reduces the treatment cost.

3. The whole process is easy to operate and control, and does not require complex equipment and harsh reaction conditions.

4. The preparation has high purity, low impurity content, low dosage and low sludge star rating compared with other products on the market.

5. Calcium-free, long-term use will not cause scaling and blockage of pipes and valve bodies.

[Characteristics of defluorination agent]

1. Compared with calcium salts, the amount of sludge produced during the removal process is very small, and the formed fluoride precipitation does not undergo inversion.

2. The treatment effect of low-concentration fluorine-containing wastewater is good. Under normal circumstances, the fluorine content of calcium salt after fluoride removal is about 20mg/L, and it is difficult to further reduce the fluorine content.

3. Fast reaction and small dosage. The defluorination mixed reaction only takes about 20 minutes, which can be added in the process according to the actual situation on site. The cost of adding reagents is more economical than the cost of calcium salt defluorination agent, alumina ion exchange and adsorption.

4. It is a multi-functional and high-efficiency fluoride remover, which has obvious effect on strengthening and removing heavy metal ions and suspended solids.

5. The product does not contain calcium, which will not cause blockage of system pipes and other components;

6. There are no free aluminum ions in the product, and the pressed filtrate has no effect on the biochemical system;

7. The processing equipment is simple, easy to take effect after adding, and does not require complicated debugging.

(Application industry)

Coal chemical industry, glass, medicine, chemical industry, rare earth, steel, electroplating, photovoltaic, circuit board, etc

High-efficiency defluorination agents can truly reduce the fluoride content in fluorinated wastewater to below 1mg/L.

MORE NEWS

2023-04-20

Specifically introduce the performance characteristics of ultrafiltration reverse osmosis equipment

1. A pretreatment protection device should be installed at the front of the ultrafiltration reverse osmosis equipment to ensure that the high-pressure pump and reverse osmosis membrane are not damaged by hard objects.

2023-04-20

Analysis of the causes of scaling in ultrafiltration equipment

The reverse osmosis method is mainly used in various membrane water treatment processes. Simple equipment can be directly called ultrafiltration equipment, and complex equipment is called reverse osmosis system. When using a reverse osmosis device, scaling will inevitably occur, which is not only difficult to clean up, but also affects the water production effect. What is the reason for the scaling of ultrafiltration equipment?

2023-04-20

Analysis of the role of ultrafiltration reverse osmosis equipment in the industrial water industry

Ultrafiltration reverse osmosis equipment is widely used in industrial water. There are often various impurities and microorganisms in industrial water, which can adversely affect production. It can filter out these impurities and microorganisms in the water through physical or chemical action, so that the water reaches the purity required for production.

2022-07-28

Advantages of fluoride remover, the effect of fluoride remover on water quality

Scope of application of fluoride remover, application field of fluoride remover, this paper first introduces the basic properties and hazards of fluorine element, and then introduces the advantages of Huanrui fluoride remover and its impact on water quality.

2022-01-10

What are the characteristics of fluoride remover

Fluoride remover is a kind of agent that can remove chlorides in water. With more and more factories and more serious pollution problems, fluoride remover products are welcomed by the majority of producers. So, what are the characteristics of such products? Below, let's take a look.

2021-11-12

Application of fluoride remover

At present, the commonly used methods for defluorination of sewage and industrial wastewater include precipitation method, adsorption method, coagulation sedimentation method, reverse osmosis method, ion exchange method, electroprecipitation method, etc. These methods have different costs, effects, procedures, and equipment replacement frequencies. Degree of advantages and disadvantages.